Damp2Dry PACD150 사용자 설명서 - 페이지 9

{카테고리_이름} Damp2Dry PACD150에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Damp2Dry PACD150 16 페이지. 150 pint commercial dehumidifier

ConTrol panel

TIme: Press this to display working hours and total working time.

• Once the unit is running, the display will show the humidity setting

(left) and current humidity (right). Humidity setting can be changed by

pressing "Up" or "Down."

• Time settings are based on minutes. For example, if the display shows

"0000:50," this means that the unit has worked for 50 minutes since

powered on. If you want to view the total working time, press "T" again

and the display will show this for 10 seconds, then return automatically

to the original working hours. (Pressing "T" before the 10 seconds will

return the display to the original working hours.)

• If the unit is powered on but not in operation, the LED will not display

anything. If "T" is pressed once, the working hours from the previous

time the unit ran will display for 10 seconds. Within the 10 seconds, if

"T" is pressed again, the total working time will display for 10 seconds.

If there is no action within those 10 seconds, the LED will automatically

shut off.

• If "T" is pressed when LED displays the total working time, the LED

will shut off immediately. The current working time will be deleted by

pressing and holding down "T" for 5 seconds; the time will be reset, but

the deleted time will be added into the total working time.

NOTE: The total working time cannot be deleted. If the time is beyond

the range of what the LED can show, it will be deleted and restart

from zero.

NOTE: If a power outage occurs while the unit is powered on, the unit

automatically resumes operation at the most recent settings when power

is restored.

Error Messages (E1, E2, E3, E4): See the troubleshooting guide at the

back of this manual for meanings/assistance.

(continued)

-7-