Dan D'Agostino Momentum 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Dan D'Agostino Momentum에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dan D'Agostino Momentum 13 페이지. Hd preamplifier
Dan D'Agostino Momentum에 대해서도 마찬가지입니다: 소유자 매뉴얼 (13 페이지), 소유자 매뉴얼 (10 페이지), 소유자 매뉴얼 (15 페이지), 소유자 매뉴얼 (11 페이지), 소유자 매뉴얼 (11 페이지)
페이지 인쇄Package contents
Package contents
If any of the following items are missing, please contact your dealer:
1 Momentum monoblock amplifier encased in protective vinyl sleeve
ü
1 owner's manual
ü
1 pair of white lifting gloves
ü
1 microfiber cleaning cloth
ü
1 AC power cord
ü
1 single-ended RCA-to-balanced XLR adapter connection
ü
Unpacking the Momentum monoblock amplifier from the Pelican case
Two adults are recommended for lifting the nearly 100-pound amplifier from the Pelican
case. When the amplifier is still in its case, please move it to a location near the place where
it will be installed. Remove all jewelry including watches, rings and belts from your person to
avoid damage to the exterior of the amplifier during the removal and installation.
Installation requirements
The surface that will support the Momentum monoblock amplifier must be capable of safely
supporting the nearly 100-pound weight of each amplifier.
Adequate ventilation must be provided for the amplifier. There should be at least 3 inches
of clearance on each side of the amplifier and 3 inches of clearance at the top, and the
bottom vents of the amplifier must not be obstructed by thick carpet, dust, etc. We
recommend that the amplifier be installed in an open equipment rack or on amplifier stands
to assure proper ventilation. The amplifier may be installed in a closed cabinet on in an
equipment closet, but the cabinet or closet must be designed with substantial ventilation at
top and bottom; active ventilation (i.e., powered fans) is preferred. Do not place the amplifier
directly on a carpeted floor.
For best possible sound quality and maximum output, we recommend you connect each pair
of Momentum monoblock amplifiers to a dedicated 20-amp outlet.
n