Dan D'Agostino Momentum Kullanıcı El Kitabı - Sayfa 4

Amplifikatör Dan D'Agostino Momentum için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dan D'Agostino Momentum 13 sayfaları. Hd preamplifier
Ayrıca Dan D'Agostino Momentum için: Kullanıcı El Kitabı (13 sayfalar), Kullanıcı El Kitabı (10 sayfalar), Kullanıcı El Kitabı (15 sayfalar), Kullanıcı El Kitabı (11 sayfalar), Kullanıcı El Kitabı (11 sayfalar)

Package contents

If any of the following items are missing, please contact your dealer:

1 Momentum monoblock amplifier encased in protective vinyl sleeve

1 owner's manual

1 pair of white lifting gloves

1 microfiber cleaning cloth

1 AC power cord

1 single-ended RCA-to-balanced XLR adapter connection

Unpacking the Momentum monoblock amplifier from the Pelican case

Two adults are recommended for lifting the nearly 100-pound amplifier from the Pelican

case. When the amplifier is still in its case, please move it to a location near the place where

it will be installed. Remove all jewelry including watches, rings and belts from your person to

avoid damage to the exterior of the amplifier during the removal and installation.

The surface that will support the Momentum monoblock amplifier must be capable of safely

supporting the nearly 100-pound weight of each amplifier.

Adequate ventilation must be provided for the amplifier. There should be at least 3 inches

of clearance on each side of the amplifier and 3 inches of clearance at the top, and the

bottom vents of the amplifier must not be obstructed by thick carpet, dust, etc. We

recommend that the amplifier be installed in an open equipment rack or on amplifier stands

to assure proper ventilation. The amplifier may be installed in a closed cabinet on in an

equipment closet, but the cabinet or closet must be designed with substantial ventilation at

top and bottom; active ventilation (i.e., powered fans) is preferred. Do not place the amplifier

directly on a carpeted floor.

For best possible sound quality and maximum output, we recommend you connect each pair

of Momentum monoblock amplifiers to a dedicated 20-amp outlet.