AirTurn PEDpro 운영 매뉴얼 - 페이지 7

{카테고리_이름} AirTurn PEDpro에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTurn PEDpro 16 페이지. Hands-free bluetooth controller

CHANGING THE MODE

Turn on the PEDpro.

Press and hold the MODE button. The red LED will flash

Release the MODE button following the number of

flashes that reflects the desired MODE. The blue and red

LEDs will flash together the number of times indicating

which MODE has been set.

Example: To set MODE 2 hold the MODE button for 2

flashes of the red LED, release and both LEDS will flash 2

times to confirm the MODE 2 setting.

Note: Once the MODE has been set, it will remain the same

until it is changed following the above steps.

Once the PEDpro is powered on, the blue LED will blink 2

times per second until pairing is completed.

once per second from 1 to 6 flashes. The number

of flashes corresponds to the same MODE

number. Be sure to count the flashes.