Danatronics ECHO 7DL 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Danatronics ECHO 7DL에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danatronics ECHO 7DL 9 페이지. Thickness gages

Class 2 with interface echo at left and first detected backecho on right. Also shown in interface

blank (dead zone) below the interface echo.

Class 3, marker shows measured time between echo 1 and echo 2 after an interface echo. Also

shown is the blank after first

A2-DFR CLF4 transducer

Class Five for

After selecting transducer, the transducer setup screen will appear. Press F4

measure to use the default parameters and go directly to the measurement

screen or make any necessary parameter adjustments prior to pressing F4

Ver: 2.0