Danatronics ECHO 7DL 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Danatronics ECHO 7DL에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danatronics ECHO 7DL 9 페이지. Thickness gages

After an Auto Zero is performed on a selected transducer, the unit automatically goes to the

Measure mode as shown below.

To take thickness readings, simply apply couplant (fluid in gage kit bottle) to the material's

surface followed by the transducer to measure the thickness. Depending on the settings, the

display may show other parameters. Press F4 to key to toggle between available display types

For more detailed information on Measure mode, please see the full ECHO series manual

6. Changing Resolution

To change between 3 digit and 4 digit resolution, go to the Main Menu, then select initial settings,

use the up or down keys to select resolution, press the F1 back button to exit the menu and

return to the previous screen.

Ver: 2.0