Airuno Bach Evo 설치 및 사용자 지침 - 페이지 10

{카테고리_이름} Airuno Bach Evo에 대한 설치 및 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Airuno Bach Evo 16 페이지. Ceiling hood

페이지 인쇄

3.2.2 Controls

The Salieri is controlled by remote control. This allows

the user to control the hoods on/off functions and

motor speeds.

Turns the motor on at speed 2 and for turning the

motor off.

Increases motor speed.

Decreases motor speed.

Turns lights on and off.

Timer button for turning the motor off after 10

minutes.

On first use the user will need to pair the remote

control with the ceiling hood extractor. With the hood

turned off, press and hold the fan button on the

ceiling hood until the LED come son constant. Once

this has happened press any button on the remote

control to check all functions are working correctly.

4. Use & Maintenance

Before

beginning

maintenance work, turn the power off to the hood

by turning the main switch to 0 (OFF).

4.1 Cleaning the Metal Filters

The metal filters fitted in the hood should be washed

every 2-3 months, depending on how much the hood

is used, using hot water and a liquid detergent that is

not too aggressive.

The metal filters can be removed by the special

handle, unhooking the front part of the filter and

pulling it downwards (Fig 22).

any

sort

cleaning

Fig 21

4.2 Carbon Filters

The hood can be used with active carbon filters which

traps the cooking smells. There are either polyester or

long life carbon filters and these are situated behind

the grease filters.

4.2.1 Polyester Carbon Filters

These cannot be reused or washed and must be

periodically changed (every 4 months if the hood is

used for 2 hours every day). Saturated filters could be

a fire hazard. The filters in the Salieri are rectangular.

4.2.2 Long Life Carbon Filters

These can be cleaned and reactivated. The filter

should be cleaned every other month if used

normally. The filter is best cleaned in a dishwasher at

the highest temperature using normal washing

detergent. The filter should be washed on its own to

prevent particles of food fastening in it and then

causing an unpleasant smell later on (Fig 23).

To reactivate, the carbon filter should be dried in the

oven. Choose upper/lower heat and maximum 100°C

and dry the filter for 10 minutes (Fig 24). The filter

must be changed when it no longer absorbs the

cooking smells sufficiently.

Fig 22

65°C

Fig 23