Ducati Desmosedici 2008 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Ducati Desmosedici 2008에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ducati Desmosedici 2008 7 페이지. Bazzaz z-fi

6. Secure the Bazzaz harness ground lug to a chassis ground. Bazzaz recommends using the factory mount-

ing bolt for the radiator mount attached to the left front cylinder head (photo 10).

Bazzaz Ground Lug Installed

7. Locate the throttle position sensor and disconnect the factory harness connector. Pull back the harness

sheathing to expose the three wires of the factory harness and crimp on a supplied scotch lok connector

onto the (orange wire). Insert the Bazzaz throttle position sensor T-tap connector (blue wire) into the

scotch lok and reinstall the factory harness connector onto the sensor (photos 11 & 12).

Bazzaz TPS (Blue) onto Factory Orange

8. Now that the air box has been reinstalled, connect Bazzaz injector connectors in line with the factory

harness connector and the connector located on the left side of the air box (photos 13 & 14).

Photo 10

Photo 11

Photo 12