Ducati Desmosedici 2008 Installation Instructions Manual - Page 5

Browse online or download pdf Installation Instructions Manual for Control Unit Ducati Desmosedici 2008. Ducati Desmosedici 2008 7 pages. Bazzaz z-fi

Print Page
Ducati Desmosedici 2008 Installation Instructions Manual
6. Secure the Bazzaz harness ground lug to a chassis ground. Bazzaz recommends using the factory mount-
ing bolt for the radiator mount attached to the left front cylinder head (photo 10).
Bazzaz Ground Lug Installed
7. Locate the throttle position sensor and disconnect the factory harness connector. Pull back the harness
sheathing to expose the three wires of the factory harness and crimp on a supplied scotch lok connector
onto the (orange wire). Insert the Bazzaz throttle position sensor T-tap connector (blue wire) into the
scotch lok and reinstall the factory harness connector onto the sensor (photos 11 & 12).
Bazzaz TPS (Blue) onto Factory Orange
8. Now that the air box has been reinstalled, connect Bazzaz injector connectors in line with the factory
harness connector and the connector located on the left side of the air box (photos 13 & 14).
Photo 10
Photo 11
Photo 12