Anyload DD-KC1 사용 설명서 - 페이지 3
{카테고리_이름} Anyload DD-KC1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload DD-KC1 11 페이지. Digital weight indicator
Anyload DD-KC1에 대해서도 마찬가지입니다: 운영 매뉴얼 (13 페이지)
페이지 인쇄
the Maximum Capacity and Division. After the screen displays "0", you can begin to
measure the object.
When power-on, press
4.2 Instruction for load cell connection
4.2.1 Connection of the load cell
The connection of the four wire load cell and the indicator：
Connect +EXC with the red wire of the indicator's cable.
Connect –EXC with the black wire of the indicator's cable.
Connect +SIG with the green wire of the indicator's cable.
Connect –SIG with the white wire of the indicator's cable.
The indicator provides driving voltage through +EXC wire and –EXC wire. +SIG
wire and –SIG wire will transmit the change of signal voltage to the indicator.
*To avoid short circuit, please make sure the welding parts of all the wires
covered by the heat shrinking tube.
Figure： Connection of the Load Cell and the indicator
4.2.2 Load cell output sensitivity:
1～2m V／V
4.2.3 Factory parameter setting.
1. Turn off the scale, then hold the three buttons:
same time until the screen displays "------"；
2. Press
3. Press
Page 3 of 11
button to turn off the scale.
or
button to go through the menu；
button to enter the display menu.；
,
Anyload-manual-indicator-DD-KC1-en-101
and
at the