Anyload DD-KC1 Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Accessories Anyload DD-KC1. Anyload DD-KC1 11 pages. Digital weight indicator
Also for Anyload DD-KC1: Operation Manual (13 pages)

Print Page
Anyload DD-KC1 Instruction Manual
the Maximum Capacity and Division. After the screen displays "0", you can begin to
measure the object.
When power-on, press
4.2 Instruction for load cell connection
4.2.1 Connection of the load cell
The connection of the four wire load cell and the indicator：
Connect +EXC with the red wire of the indicator's cable.
Connect –EXC with the black wire of the indicator's cable.
Connect +SIG with the green wire of the indicator's cable.
Connect –SIG with the white wire of the indicator's cable.
The indicator provides driving voltage through +EXC wire and –EXC wire. +SIG
wire and –SIG wire will transmit the change of signal voltage to the indicator.
*To avoid short circuit, please make sure the welding parts of all the wires
covered by the heat shrinking tube.
Figure： Connection of the Load Cell and the indicator
4.2.2 Load cell output sensitivity:
1～2m V／V
4.2.3 Factory parameter setting.
1. Turn off the scale, then hold the three buttons:
same time until the screen displays "------"；
2. Press
3. Press
Page 3 of 11
button to turn off the scale.
or
button to go through the menu；
button to enter the display menu.；
,
Anyload-manual-indicator-DD-KC1-en-101
and
at the