Anyload A2A-D2 제품 설명서 - 페이지 4

{카테고리_이름} Anyload A2A-D2에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload A2A-D2 8 페이지. (v1611) load cell amplifier

Connection and Switch Diagrams

4.1 Connection Diagram

Red: E+

Black: E-

Green: S+

White: S-

4.2 Output Port

Refer to the diagram above, the left terminal (Io) is for the

positive terminal for current output while the right terminal (Vo)

is for the positive terminal for voltage output. The middle

terminal (-) is the common ground for both current and voltage

outputs.

Only the voltage terminals output can give complimentary

voltage output (±10V)

4.3 Excitation voltage

Through the slide switch EXC, the A2A-D2 can provide either

12VDC or 5VDC excitation voltage to the load cell.

4.4 Gain

The A2A-D2 amplifier can be applied to any load cells with its

specified sensitivity. It can support 4 ranges of Gain. User can

select suitable gain that matches to the load cell's sensitivity,

excitation voltage and output signal by configuring the excitation

slide switch (EXC), the 4-bit DIP switch, and the SPAN

potentiometer. Refer to Tables below for the DIP switch and Gain

range selection.

3 |

ANYLOAD A2A-D2 Amplifier Product Manual (V1810)