AnyTone AT-500M 사용 설명서 - 페이지 8
{카테고리_이름} AnyTone AT-500M에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyTone AT-500M 13 페이지. 10 meter radio
페이지 인쇄
(5)
Short press
(6)
Long press
NO. LCD display
1
2
3
4
5
6
7
8
9
10
AT-500M
key to validate the mode and exit setting.
key or wait 10 seconds to store exit MENU.
Function detail
CTCSS/DCS
encode/decode
Beep sound
RF power setting
Scan type setting
HI-CUT setting
Microphone gain
Microphone type
VOX Sensitivity
VOX Time
Talkback level
control
Setting details
: CTCSS/DCS is OFF;
CT: 67.0Hz~250.3Hz；
DT: D023N~D754N；
Note: This function is optional.
: turn on beep sound
: turn off beep sound
Default:
LO: low power
nI: middle power
HI: high power
Default: LO
Note:
This function is valid only when the
radio work in HF model or HAM model.
Sq: squelch scan
tI: time scan
Default:
: turn off HI-CUT function
: turn on HI-CUT function
Default:
1~9, Total 9 levels
Default: 6
EL: Electronic
dy: Dynamic
Default: EL
Note: Speak into microphone and watch
the S-meter to choose wanted mic gain .
1~9: total 9 levels
Default: 3
1~9: Total 9 levels
Default: 4
, 1~9
Default:
6