AnyTone AT-D269 운영 매뉴얼 - 페이지 7
{카테고리_이름} AnyTone AT-D269에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyTone AT-D269 17 페이지. Digital dmr and analog vhf/uhf two way radio
Turn on/off the radio
3.1
Turn on the radio: When the radio is off, turn the [Power/Volume] switch
clockwise. After the radio makes a "click", the power of the radio is turned
on, and the orange indicator light of the radio lights up. Prompt the current
channel number, channel type, power, etc. in a voice prompt mode.
Turn off the radio: When the radio is on, turn the [Power/Volume] switch
counterclockwise until the radio makes a "click" sound, which means the
power of the radio is turned off.
Note: Do not remove the battery immediately when the power is turned
off to prevent errors in saving data.
Volume adjustment
3.2
When the radio is on, turn the [Power/Volume] switch to adjust the volume.
Turn clockwise to increase volume; turn counterclockwise to decrease
volume.
Note: In analog mode, you can press the [PF2] key to monitor the
background sound (programmed to monitor), and rotate the [Power/
Volume] switch to adjust the volume. When the radio is in communication,
the desired volume can be adjusted more accurately.
Selecting Zone
3.3
Press programmed Zone key to change Zone.
Selecting Channel
3.4
In standby, turn the channel knob to adjust the channel, clockwise increase
channel and counter clockwise to decrease channel.
Receive and answer digital calls
3.5
Use the band switch to select the channel you want to receive digital calls,
then you can receive and answer calls from users with matching group call
IDs or matching individual call IDs.
Note: When the user uses the key function, the transmitter and receiver must
have the same key to talk to each other.
※ To receive/answer digital calls:
(1) If the radio has a programmed group call/individual call tone, when a
call is received, the radio will make a short tone, indicating that the radio is
receiving.
(2) In the receiving state, the light blue LED indicator will light up.
(3) When the transmitter ends the call, press and hold the [PTT] key, the
3
3. BASIC OPERATIONS
AT-D269 Digital DMR and Analog VHF/UHF Two Way Radio