AnyTone AT-D269 Kullanım Kılavuzu - Sayfa 7

İki Yönlü Telsiz AnyTone AT-D269 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AnyTone AT-D269 17 sayfaları. Digital dmr and analog vhf/uhf two way radio

Sayfayı Yazdır

Turn on/off the radio

3.1

Turn on the radio: When the radio is off, turn the [Power/Volume] switch

clockwise. After the radio makes a "click", the power of the radio is turned

on, and the orange indicator light of the radio lights up. Prompt the current

channel number, channel type, power, etc. in a voice prompt mode.

Turn off the radio: When the radio is on, turn the [Power/Volume] switch

counterclockwise until the radio makes a "click" sound, which means the

power of the radio is turned off.

Note: Do not remove the battery immediately when the power is turned

off to prevent errors in saving data.

Volume adjustment

3.2

When the radio is on, turn the [Power/Volume] switch to adjust the volume.

Turn clockwise to increase volume; turn counterclockwise to decrease

volume.

Note: In analog mode, you can press the [PF2] key to monitor the

background sound (programmed to monitor), and rotate the [Power/

Volume] switch to adjust the volume. When the radio is in communication,

the desired volume can be adjusted more accurately.

Selecting Zone

3.3

Press programmed Zone key to change Zone.

Selecting Channel

3.4

In standby, turn the channel knob to adjust the channel, clockwise increase

channel and counter clockwise to decrease channel.

Receive and answer digital calls

3.5

Use the band switch to select the channel you want to receive digital calls,

then you can receive and answer calls from users with matching group call

IDs or matching individual call IDs.

Note: When the user uses the key function, the transmitter and receiver must

have the same key to talk to each other.

※ To receive/answer digital calls:

(1) If the radio has a programmed group call/individual call tone, when a

call is received, the radio will make a short tone, indicating that the radio is

receiving.

(2) In the receiving state, the light blue LED indicator will light up.

(3) When the transmitter ends the call, press and hold the [PTT] key, the

3. BASIC OPERATIONS

AT-D269 Digital DMR and Analog VHF/UHF Two Way Radio