DuctSox U-Track 설치 매뉴얼 - 페이지 7
{카테고리_이름} DuctSox U-Track에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DuctSox U-Track 16 페이지.
페이지 인쇄Elbows
Radius track is manufactured at the same radius of the DuctSox, this is typically 1.5 times the diameter of
the DuctSox. For example, a 24" diameter DuctSox would have a radius track with a radius of 36".
(74" x 1.5 = 36")
Install at least one Track Support per radius section; in the center if possible.
Coupler will not go into radius track the full 6" (and it shouldn't). Coupler must only be inserted into radius
track 1.5". This connection will only use one screw in the radius track portion. There will be 3" radius
couplers when splicing radius-to-radius connections.)
Radius track will only work with DuctSox that are installed in
a true horizontal plane (Figure A).
Vertical elbows are supported by D-ring straps rather than
radius track (Figure B).
Figure A
Figure B
Surface Mount Hanging Option
U-Track in the 1-row style can be installed to a
ceiling surface by multiple options.
Surface Mount Clip: A specially designed clip that
snaps to the top of the U-Track. This clip can be
mounted straight to the ceiling. After mounting to
the ceiling the U-Track can be pushed up into the
clip and fastened in place. U-Track should be supported every 4 to 6 ft (1220 to 1830mm) when used in
the Surface Mount Hanging option.
Optional T-Bar Clip: A T-Bar clip is riveted (by installing contractor)
to the Surface Mount clip. The U-Track is snapped to the Surface
Mount clip and the bottom of the T-Bar ceiling support.
7
Installation Guide: U-Track