DuctSox U-Track Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Промышленное оборудование DuctSox U-Track. DuctSox U-Track 16 страниц.

Elbows

Radius track is manufactured at the same radius of the DuctSox, this is typically 1.5 times the diameter of

the DuctSox. For example, a 24" diameter DuctSox would have a radius track with a radius of 36".

(74" x 1.5 = 36")

Install at least one Track Support per radius section; in the center if possible.

Coupler will not go into radius track the full 6" (and it shouldn't). Coupler must only be inserted into radius

track 1.5". This connection will only use one screw in the radius track portion. There will be 3" radius

couplers when splicing radius-to-radius connections.)

Radius track will only work with DuctSox that are installed in

a true horizontal plane (Figure A).

Vertical elbows are supported by D-ring straps rather than

radius track (Figure B).

Figure A

Figure B

Surface Mount Hanging Option

U-Track in the 1-row style can be installed to a

ceiling surface by multiple options.

Surface Mount Clip: A specially designed clip that

snaps to the top of the U-Track. This clip can be

mounted straight to the ceiling. After mounting to

the ceiling the U-Track can be pushed up into the

clip and fastened in place. U-Track should be supported every 4 to 6 ft (1220 to 1830mm) when used in

the Surface Mount Hanging option.

Optional T-Bar Clip: A T-Bar clip is riveted (by installing contractor)

to the Surface Mount clip. The U-Track is snapped to the Surface

Mount clip and the bottom of the T-Bar ceiling support.

Installation Guide: U-Track