AnyTone AT600 설치 매뉴얼 - 페이지 14
{카테고리_이름} AnyTone AT600에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AnyTone AT600 18 페이지. Mobile signal repeater
AnyTone AT600에 대해서도 마찬가지입니다: 설치 매뉴얼 (19 페이지)
페이지 인쇄
- Secondly adjust the antennas' directions or locations or enlarge distance between them.
- Thirdly reduce the repeater's gain by ATT DIP if the above listed methods don't work.
The following measures can also be helpful:
- Use the roof of the building to enlarge isolation (Please try to place the outdoor antenna and indoor antenna on
different floors).
- Use some obstacles (Such as walls).
2. The repeater's power is on but the phone cannot get connected to the network and still can not communicate.
Reason 1: There are loose or wrong connections in the repeater system.
Solution: Please try to fasten the connections between different parts of the system.
Reason 2: The signals received by outdoor antenna of other operators nearby are too strong. (For example, the other
operators' signals are 10 dB stronger than the needed signals.)
Solution 1: Change the direction of the outdoor antenna or its installation position, so that the gap of signal strength
is reduced between operators.
Solution 2: Use barriers (like buildings and walls) to block signals from other operators.