anytronics Anyscene 512 설치 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} anytronics Anyscene 512에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. anytronics Anyscene 512 13 페이지. Scene recall unit

6. Configuration

DIP Switch Settings
The age of the unit will determine the rear layout and the availability of the individual
external scene recall headers.
Pre-July 2018 Version
DIL No.
Name
1
RFP
2
MWP
3
+256
4
Master /Speed
5
Fade x2
6
Fade x4
7
EXT
8
LED
DIL No.
Name
1
Line Bias
2
Terminator
Units 5 & 6 Hillside Industrial Estate
London Road, Horndean,
Hampshire, PO8 0BL
Tel +44 (0)23 9259 9410
Fax +44(0)23 9259 8723
Eight Way DIL Switch (Bottom Side)
Function
No Function
ON = Internal memory protected, Normal Operation
OFF = Internal memory not protected, Programming Mode
No Function
See Section 6.2
See Section 6.3
See Section 6.3
ON = Shorting the 2-way screw terminal advances to the next scene.
OFF = Shorting the 2-way screw terminal has no affect
ON = Front panel LED are bright
OFF = Front panel LED are dimmed
Two Way DIL Switch (Top Left)
Function
ON = Line Bias is used
OFF = Line Bias is removed from DMX line
ON = 120R Terminator across the DMX line
OFF = Terminator is not used
Page 6 of 13
AT1039 Issue 1
Anyscene 512 Operating
Instructions