Anywhere Fireplace SoHo 사용자 설명서 - 페이지 3

{카테고리_이름} Anywhere Fireplace SoHo에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anywhere Fireplace SoHo 4 페이지. Fireplace
Anywhere Fireplace SoHo에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지)

페이지 인쇄

MOUNTING INSTRUCTIONS

Use a level to mark a straight line with a pencil on the wall where you will mount the brackets.

The wall should be made from drywall, tile, brick, stone, etc. It must not be flammable (e.g. no

wallpaper or wood) Make sure you mount the fireplace at least 4 feet away from any drapes or

flammable materials.

The inside edges of the brackets should be spaced 4 inches apart. Mark bracket hole locations on

the wall with a pencil keeping them level with the line previously drawn.

Step 2

Using a

" drill bit, drill holes into the wall on the 4 spots where you marked the bracket hole

locations.

Step 3

Insert the wall anchors flush into holes in wall as shown above. A light tap with a hammer might

be necessary to insure it is inserted flush with the wall. If you drill a hole into a wooden stud, the

plasic wall anchor is not necessary.

NOTE: The wall anchors provided are intended to be used in drywall. If mounting on another

wall surface, make sure you have the proper mounting hardware.

Step 4

Place brackets over holes of anchors and attach to the wall by inserting the screw through the

bracket into the anchors in the wall. Make sure brackets are attached in the proper position.

See above illustration for reference.