Anywhere Fireplace SoHo Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Внутрішній камін Anywhere Fireplace SoHo. Anywhere Fireplace SoHo 4 сторінки. Fireplace
Також для Anywhere Fireplace SoHo: Інструкція з експлуатації (6 сторінок)
Друкувати сторінку
MOUNTING INSTRUCTIONS
Use a level to mark a straight line with a pencil on the wall where you will mount the brackets.
The wall should be made from drywall, tile, brick, stone, etc. It must not be flammable (e.g. no
wallpaper or wood) Make sure you mount the fireplace at least 4 feet away from any drapes or
flammable materials.
The inside edges of the brackets should be spaced 4 inches apart. Mark bracket hole locations on
the wall with a pencil keeping them level with the line previously drawn.
Step 2
Using a
5
/
" drill bit, drill holes into the wall on the 4 spots where you marked the bracket hole
16
locations.
Step 3
Insert the wall anchors flush into holes in wall as shown above. A light tap with a hammer might
be necessary to insure it is inserted flush with the wall. If you drill a hole into a wooden stud, the
plasic wall anchor is not necessary.
NOTE: The wall anchors provided are intended to be used in drywall. If mounting on another
wall surface, make sure you have the proper mounting hardware.
Step 4
Place brackets over holes of anchors and attach to the wall by inserting the screw through the
bracket into the anchors in the wall. Make sure brackets are attached in the proper position.
See above illustration for reference.