Duerkopp Adler 0511 590024 피팅 지침 매뉴얼 - 페이지 10
{카테고리_이름} Duerkopp Adler 0511 590024에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 0511 590024 12 페이지. For laser marking
페이지 인쇄
Anbauanleitung für Lasermarkierungsleuchten
6
Mounting the power supply and connecting the laser lamp
7
Ausgabe/Edition:
Änderungsindex
07.2010
Rev. index: 00.0
Teilesatz 0511 590024
Fitting Instruction for laser marking
Kit 0511 590024
1
–
Unscrew the covering 1.
–
Tilt back the machine head.
–
Mount the power supply 4 with its corresponding spacer on the
plate 2.
–
Connect the cable of the laser lamp to the clamp 3.
Check polarity!
–
Connect the cable of the power supply 6 with the plug 5 to the
plug-in connector X20, X21 or X22 of the PCB 7.
Laser 1: X20 switchable with output Y21
Laser 2: X21 switchable with output Y22
Laser 3: X22 switchable with output Y23
6
1-2 = Laser lamp 1 / Retrofit lamp 1, 2
3-4 = Laser lamp 2 / Retrofit lamp 3, 4
5-6 = Laser lamp 3 / Retrofit lamp 5, 6
The retrofit lamps can be connected parallel to
the present ones, however the maximal number
allowed is 3 lamps per output.
5
x 21
Printed in Germany
Teile-Nr./ Part-No.:
0791 511700
4
3
2
7
Blatt:
von
Sheet: 10 from 12