Duerkopp Adler 0511 590024 Montaj Talimatları Kılavuzu - Sayfa 10
Dikiş Makinesi Duerkopp Adler 0511 590024 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Duerkopp Adler 0511 590024 12 sayfaları. For laser marking
Sayfayı Yazdır
Anbauanleitung für Lasermarkierungsleuchten
6
Mounting the power supply and connecting the laser lamp
7
Ausgabe/Edition:
Änderungsindex
07.2010
Rev. index: 00.0
Teilesatz 0511 590024
Fitting Instruction for laser marking
Kit 0511 590024
1
–
Unscrew the covering 1.
–
Tilt back the machine head.
–
Mount the power supply 4 with its corresponding spacer on the
plate 2.
–
Connect the cable of the laser lamp to the clamp 3.
Check polarity!
–
Connect the cable of the power supply 6 with the plug 5 to the
plug-in connector X20, X21 or X22 of the PCB 7.
Laser 1: X20 switchable with output Y21
Laser 2: X21 switchable with output Y22
Laser 3: X22 switchable with output Y23
6
1-2 = Laser lamp 1 / Retrofit lamp 1, 2
3-4 = Laser lamp 2 / Retrofit lamp 3, 4
5-6 = Laser lamp 3 / Retrofit lamp 5, 6
The retrofit lamps can be connected parallel to
the present ones, however the maximal number
allowed is 3 lamps per output.
5
x 21
Printed in Germany
Teile-Nr./ Part-No.:
0791 511700
4
3
2
7
Blatt:
von
Sheet: 10 from 12