Addi-Data CPCI-1710 매뉴얼 - 페이지 10

{카테고리_이름} Addi-Data CPCI-1710에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Addi-Data CPCI-1710 13 페이지. Multifunction counter board, optically isolated
Addi-Data CPCI-1710에 대해서도 마찬가지입니다: 기능 설명 (15 페이지)

페이지 인쇄

Function description

PCI-1710: Pulse counter

1.5.2 Connection example

Fig. 1-3: Connection example

1.6 Procedure for using the "Pulse counter" function

In order to use the "Pulse counter" function, the following steps need to be performed:

1. Program the counter value (= reload value) of the downward counter.

2. Select the edge (rising or falling) of the counter input signal that should count.

3. Define the action(s) to be performed when the counter has run down: Release interrupt; set or reset

output (only with pulse counter 0).

4. Select the counter mode (Continuous or Single mode).

5. Enable the counter via the gate bit.