Duerkopp Adler 506 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Duerkopp Adler 506에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 506 8 페이지.
Duerkopp Adler 506에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)

2.3 Attaching the Yarn Stand

–

Insert the yarn stand into the appropriate hole in the table and

attach with the nuts and washers.

After transport the V-belt tension set at the factory is to be checked.

The notched V-belt must be under sufficient tension for the unit to run

softly into the end position.

Tension the V-belt so that it can be pushed in at the center approx.

10 mm by finger pressure.

Correcting the V-belt tension:

–

Loosen nut 1.

–

Swing the sewing drive 2 until the desired V-belt tension is

achieved.

–

Tighten nut 1.