Duerkopp Adler 550-12-12 사용 설명서 - 페이지 12

{카테고리_이름} Duerkopp Adler 550-12-12에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 550-12-12 15 페이지.
Duerkopp Adler 550-12-12에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지)

페이지 인쇄

2.5.6 Replacing the pressure foot

Caution Risk of Injury!

Turn the main switch off.

Replace the pressure foot only with the machine turned off.

The three exchangeable pressure feet available as optional equipment

make possible a working of three different selvedge tape widths

(1,5 mm, 2,0 mm and 3,0 mm)

Dependet on the selvedge tape used, the corresponding pressure foot

and the wider tape guide B must be mounted.

–

Remove the needle.

–

Carefully pull the compressed air supply 2 from pressure foot 3.

–

Loosen mounting screw 1 and replace pressure foot 3.

–

Tighten mounting screw 1 again.

–

Carefully plug the compressed air supply 2 onto pressure foot 3.

–

Insert the needle again.

–

Set the optimum compressed air supply for the new selvedge tape

width at regulating screw 4 through sewing trials.