Danby DDW1801MWP 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Danby DDW1801MWP에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danby DDW1801MWP 11 페이지.

페이지 인쇄

INSTALLATION

PREPARATION

POSITIONING

THE APPLIANCE

ABOUT POWER

CONNECTION

INSTALLATION INSTRUCTIONS

The installation position of the dishwasher should be near the exist-

ing inlet and drain hoses and power cord. One side of the cabinet

sink should be chosen to facilitate the connection of drain hoses of

the dishwasher.

Position the appliance in the desired location on the counter top.

Make sure the unit is level and is close enough to electrical and water

hook ups.

For personal safety:

• DO NOT USE AN EXTENSION CORD OR AN ADAPTER

PLUG WITH THIS APPLIANCE.

• DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR

REMOVE THE GROUNDING CONNECTION FROM

THE POWER CORD.

ELECTRICAL REQUIREMENTS

Please look at the rating label to know the rating voltage and con-

nect the dishwasher to the appropriate power supply. Use the

required fuse 15 amp, time delay fuse or circuit breaker recom-

mended and provide separate circuit serving only for this appliance.

ELECTRICAL CONNECTION

Ensure the voltage and frequency of the power being corresponds to

those on the rating plate. Only insert the plug into an electrical

socket which is grounded properly. If the electrical socket to which

the appliancemust be connected is not appropriate for the plug:

• Have the socket replaced by a qualified professional.

• Avoid using adaptors because they could cause overheating and

burns.

Insure proper ground exists before use!

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or

breakdown, grounding will reduce the risk of electric shock by pro-

viding a path of least resistant electric current. This appliance is

equipped with a cord that has an equipment-grounding conductor

and a grouding plug. The plug must be plugged into an appropriate

outlet that is installed and grounded in accordance with all local

standards and requirements.

• Improper connection of the equipment grounding conductor

can result in the risk of an electric shock.

• Check with a qualified electrician or service representative if

you are in doubt as to whether the appliance is properly

grounded.

• Do not modify the plug provided with the appliance. If the

plug does not fit properly to the outlet, please have a

qualified electrician install a proper outlet.

WARNING