Duerkopp Adler 550-16-26 사용 설명서 - 페이지 9

{카테고리_이름} Duerkopp Adler 550-16-26에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 550-16-26 12 페이지. Sewing lamp led
Duerkopp Adler 550-16-26에 대해서도 마찬가지입니다: 피팅 지침 (2 페이지), 사용 설명서 (19 페이지)

페이지 인쇄

4. Electrical Connection

4.1 Checking the Nominal Voltage

ATTENTION !

Any work on the electrical equipment of the sewing unit should

be carried out exclusively by the properly qualified electricians or by

the

properly qualified staff!.

The mains plug must be pulled out.

It is absolutely necessary to respect the enclosed manufacturer's

instructions for the step motor.

ATTENTION !

The nominal voltage, stated on the type plate, should agree with the

local voltage!

Use the terminal bar 3 and the transformer 6 in the control cabinet for

adapting to the local voltage.

–

Screw off the cover 1 at the switch cabinet.

–

Loosen the screws 2 and 5 and remove the guard 4.

–

Check the arrangement of the connections on the terminal bar 3

and on the transformer 6.

(See circuit diagrams)

–

If necessary, change the connections according to the local

voltage.

–

Re-assemble the guard 4 and screw on with the screws 2 and 5.

–

Re-assemble the cover 1 on the switch cabinet and screw on.