Danby DDW2405BL 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Danby DDW2405BL에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danby DDW2405BL 13 페이지. Built-in
Danby DDW2405BL에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (13 페이지)

Danby DDW2405BL 설치 지침 매뉴얼

STEP 8 POSITION DISHWASHER UNDER COUNTERTOP

• Check to be sure that wires are secure under the
dishwasher and not pinched or in contact with
door springs or other dishwasher components.
TIP: Check tub insulation blanket.
It should be positioned so it is not bunched up or
interfering with door springs. Check by opening
and closing door.
• Push dishwasher into cabinet. The front corners
of the dishwasher door should be flush with
cabinet doors. Be careful not to dent front panel
with knees or damage countertop or cabinets
with dishwasher parts.

STEP 9 LEVEL DISHWASHER

IMPORTANT -
Dishwasher must be
level for proper dish rack operation and
wash performance.
• Place level on door
and rack track inside
the tub as shown to
check that the dish-
washer is level.
INSTALLATION INSTRUCTIONS
• Level the
dishwasher by
adjusting the four
leveling legs
individually.
TIP: Pull lower rack out, about halfway. Check
to be sure the rack does not roll forward or
back into dishwasher. If the rack rolls in either
direction, the dishwasher must be leveled
again.
• If the door hits the tub, the dishwasher is not
installed correctly. Adjust leveling legs to align
door to tub.
7