Danby DDW2405BL Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zmywarka Danby DDW2405BL. Danby DDW2405BL 13 stron. Built-in
Również dla Danby DDW2405BL: Instrukcja instalacji (13 strony)

Drukuj stronę

STEP 8 POSITION DISHWASHER UNDER COUNTERTOP

• Check to be sure that wires are secure under the

dishwasher and not pinched or in contact with

door springs or other dishwasher components.

TIP: Check tub insulation blanket.

It should be positioned so it is not bunched up or

interfering with door springs. Check by opening

and closing door.

• Push dishwasher into cabinet. The front corners

of the dishwasher door should be flush with

cabinet doors. Be careful not to dent front panel

with knees or damage countertop or cabinets

with dishwasher parts.

STEP 9 LEVEL DISHWASHER

IMPORTANT -

Dishwasher must be

level for proper dish rack operation and

wash performance.

• Place level on door

and rack track inside

the tub as shown to

check that the dish-

washer is level.

INSTALLATION INSTRUCTIONS

• Level the

dishwasher by

adjusting the four

leveling legs

individually.

TIP: Pull lower rack out, about halfway. Check

to be sure the rack does not roll forward or

back into dishwasher. If the rack rolls in either

direction, the dishwasher must be leveled

again.

• If the door hits the tub, the dishwasher is not

installed correctly. Adjust leveling legs to align

door to tub.