Duerkopp Adler 745-23 설치 지침 및 교체 부품 목록 - 페이지 10

{카테고리_이름} Duerkopp Adler 745-23에 대한 설치 지침 및 교체 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 745-23 14 페이지.

4. Electrical Connection

4.1 Attaching the Microcontrol Control Unit

ATTENTION !

All work on the electrical components of the sewing unit may only be

conducted by electricians or appropriately instructed persons.

The mains plug must be pulled.

The Microcontrol control unit is fastened onto plate 1 with the set

screws 2.

–

Place the Microcontrol control unit on the plate 1.

–

Secure the set screws 2 on the underside of plate 1 with washers

and nuts.

–

Make the cable connection.

Attention !

Carefully insert the plugs into the back of the control unit.

In as far as these exist observe the same designations on the

cables and the back.

Also observe the differing outfitting of the plugs with contact pins

and contact sockets, as well as their number and arrangement.

–

Tighten the screws of the plugs.