Duerkopp Adler 745-26 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Duerkopp Adler 745-26에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 745-26 18 페이지.

3. Attaching fitments removed for despatch

Depending on the version, the sewing machine is equipped either with

a single pedal or with two (right and left).

The pedal 4 is attached to the lower cross-member 5:

–

Fix the pedal 4 to the lower cross-member 5 with the bracket 3.

The oblong slots in the bracket 3 enable the height to be slightly

adjusted.

Adjust the height of bracket 3 so that the pedal 4 can be easily

operated.

–

The second bracket 1 (supplied) acts as a support.

Attach bracket 1 as shown in the illustrations,

placing the four separator rings 2 between brackets 1 and 3.

–

Fit pedal linkage 6.

–

Slightly loosen locking screw 7.

–

Adjust the height of the pedal linkage 6 so that the pedal 4 is

horizontal when fully depressed.

–

Tighten locking screw 7.