Anzzi SB-AZ009WC 설치 및 운영 매뉴얼 - 페이지 12

{카테고리_이름} Anzzi SB-AZ009WC에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anzzi SB-AZ009WC 14 페이지. Shower base
Anzzi SB-AZ009WC에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (8 페이지)

페이지 인쇄

STEP 6

It is recommended not to stand in base

●

while securing to wall. Set base in corner

and press it into mortar.

Secure flanges to all studs with #8(1-1/2")

screws through previously drilled holes.

(Fig 6)

IMPORTANT: Gaps between flanges

and studs must be less than 1/8".

Insert shims to fill gaps if needed.

STEP 7

Allow the mortar to completely harden before applying weight to the bottom of the shower

●

tray.

Install the Drywall above the tile flanges and secure it to the studs.

●

Put the tiles (or other finishing wall material) over the drywall leaving 1/8" gap between the

●

bottom of the tile and the splash rim of the shower tray. Use caulk to fill that gap. (Fig 7)

Caulk

1/8"

gap

Base

Side View

Fig. 7

Fig. 6

Waterproof Drywall to the

top of the tile flange

Stud

Drywall

Finished wall overlaps the

dry wall and tile flange

Shim