Anzzi SD-AZ8076-01 Series 설치 및 운영 매뉴얼 - 페이지 14
{카테고리_이름} Anzzi SD-AZ8076-01 Series에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anzzi SD-AZ8076-01 Series 16 페이지. Glass shower door
페이지 인쇄
6
1.
Carefully remove the Corner Protectors from the Door Panel [07] and attach the
Hinge-Side Vinyl Seal [06] to the side of it. (Fig 6.1)
2.
Make sure the Hinge-Side Vinyl Seal [06] is 0.1" above the Deck and the Flange of
the Hinge-Side Vinyl Seal [06] is behind the Fixed Panel [01]. (Fig 6.1, Fig 6.2)
3.
If the Hinge-Side Vinyl Seal [06] is longer than the Door Panel [07] after installation,
cut it to correct length. (Fig 6.3)
4.
Attach the Bottom Water Proof Strip [09] to the bottom of Door Panel [07] close to the
Hinge-Side Vinyl Seal [06]. The Flange of the Bottom Water Proof Strip [09] faces
inside. (Fig 6.1)
5.
If the Bottom Water Proof Strip [09] is longer than the Door Panel [07] after installation,
cut it to correct length. (Fig 6.4)
12
6