Addi-Data MSX-E Series 기술 설명 - 페이지 11

{카테고리_이름} Addi-Data MSX-E Series에 대한 기술 설명을 온라인으로 검색하거나 PDF를 다운로드하세요. Addi-Data MSX-E Series 20 페이지.

Mounting and connection

1.2.2 Angle bracket mounting

With the mounting set MX-Screw (see document "MSX-E Accessories"), you can fit the Ethernet

system for direct attachment to machines or other devices.

According to your requirements, you can fix all four brackets pointing either outwards or inwards.

To mount the brackets, proceed as follows:

www.addi-data.com

NOTICE!

The housing of the Ethernet system must not be opened or the

warranty claim will be invalid (see also the system-specific MSX-E

manual, Chapter 1.2.4)!

For this reason, the housing part to which the angle brackets are

fixed has to be in a horizontal position during mounting to prevent

it from loosening from the entire housing.

If the Ethernet system cannot be positioned in this way, the

respective housing part has to be pushed towards the inside of the

system during the whole mounting process so that the housing

remains closed (see the following figure).

MSX-Exxxx