Addi-Data MSX-E Series Descrição técnica - Página 11

Procurar online ou descarregar pdf Descrição técnica para Hardware de rede Addi-Data MSX-E Series. Addi-Data MSX-E Series 20 páginas.

Mounting and connection

1.2.2 Angle bracket mounting

With the mounting set MX-Screw (see document "MSX-E Accessories"), you can fit the Ethernet

system for direct attachment to machines or other devices.

According to your requirements, you can fix all four brackets pointing either outwards or inwards.

To mount the brackets, proceed as follows:

www.addi-data.com

NOTICE!

The housing of the Ethernet system must not be opened or the

warranty claim will be invalid (see also the system-specific MSX-E

manual, Chapter 1.2.4)!

For this reason, the housing part to which the angle brackets are

fixed has to be in a horizontal position during mounting to prevent

it from loosening from the entire housing.

If the Ethernet system cannot be positioned in this way, the

respective housing part has to be pushed towards the inside of the

system during the whole mounting process so that the housing

remains closed (see the following figure).

MSX-Exxxx