Duevi EZY-LAN 매뉴얼 - 페이지 7

{카테고리_이름} Duevi EZY-LAN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duevi EZY-LAN 12 페이지. Wireless alarm panel with ethernet + wi-fi + gsm + lte
Duevi EZY-LAN에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지), 사용자 설명서 (5 페이지)

페이지 인쇄

OUTPUTS MANAGEMENT

Shelly devices make the management of outputs

available in the control panel.

The outputs, like the zones, can be set within the

device in which they are present and allow the

following settings:

•

Output name

•

Output type: ON / OFF, Impulsive

•

Status at rest: NC, NO

•

[IF IMPULSIVE] Pulse duration in seconds

•

Output category:

Light

Roller shutter

Gate

Irrigation

Relay

The category is used to assign an icon to the

output and group the outputs by type in the App

control.

PLEASE NOTE

The outputs that are manually controlled

by users must be added, like the zones,

within the sectors. In this way, users will

be able to control only the outputs present

within the sectors to which they have

access.

12.2 Sectors (SETUP)

The use of multiple SECTORS (up to a maximum

of 8) allows you to partition the system, as well as

limit user control to only certain portions of the

system.

Each sector has settings independent from the

others (eg entry time, exit time, alarm times, open

door management, etc).

The SECTORS page contains the list of all

created sectors (two sectors are already present

by default: "Perimetrali" and "Volumetrici").

Pressing the icon

the zones and outputs inserted within the sector.

Pressing the icon

Sector.

Pressing the icon

settings, where you can change its properties.

•

Sector Name: is the name with which the

sector is identified in all menus, notifications,

events, etc.

•

Entry Delay: it is the entry delay that is

activated for the zones set as delayed

•

Exit Delay: it is the exit delay that is activated

at the time of arming (in the case of

simultaneous arming of several sectors, the

longest time is considered)

(info) expands the display of

(trash can) deletes the

(gear) you enter the sector

•

Low Alarm (L1) duration: duration of the low

level alarm

•

High Alarm (L2) duration: duration of the high

level alarm

•

Alert: enable / disable the bell sound (chime)

for the sector

•

Automation 2xL1=L2: enables / disables the

function whereby when two zones of level L1

detect, an alarm of level L2 is automatically

generated

•

Open door control: disabled, only notify, zone

inhibition, immediate alarm

•

Adding or deleting the Zones and Outputs

present within the sector

12.3 Actions (SETUP)

ACTIONS

define

performed manually by the user or recalled within

other programming settings.

An Action can be performed by:

•

Button of a keyfob

•

User through the App

•

Scenario

•

Timer Program

•

Logic

The ACTIONS page contains the list of all the

actions created.

By default there are already three arming actions:

Totale

[arm

"Perimetrali"

sectors], Disinserito [disarm all sectors], Parziale

[arm "Perimetrali" sector and disarm "Volumetrici"

sector].

Pressing the icon

Action.

Pressing the icon

settings, where you can change its properties.

•

Action Name: is the name with which the

Action is identified in all menus, notifications,

events, etc.

•

Type of Action:

✓ Arming

Operation on Sectors: No change [the

sector

keeps

Activate

Deactivate [the sector is disarmed].

✓ Relay control - Can be used for:

Shelly 1 / 1L

Shelly 2.5 (dual relay mode)

Shelly Plug S

✓ White light control - Can be used for:

Shelly RGBW2

Shelly Duo

Shelly Duo - RGBW

✓ RGB light control - Can be used for:

Shelly RGBW2

Shelly Duo - RGBW

operations

that

can

"Volumetrici"

and

(trash can) deletes the

(gear) you enter the Action

its

[the

sector

state],

armed],