Dancover Multipavillon 3x6m 매뉴얼 - 페이지 3
{카테고리_이름} Dancover Multipavillon 3x6m에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dancover Multipavillon 3x6m 4 페이지. Marquee
페이지 인쇄1
Place the four corner bases (1) at the corners of a
square measuring 3x3 m.
If the marquee is mounted outside, use ground pegs
(8) inserted into the ground with a hammer.
If the marquee is mounted on a concrete or wooden
floor, the corner base can be fastened with concrete
nails or screws.
Ensure that you fasten only one corner until the
entire frame has been assembled in order to ensure
that the other corner bases are placed correctly within
the square.
4
2
1
Place the longest tubes (2) in the two outermost holes
in each corner base and the shorter tube (4) in the
middle hole. Mount the tubes so the snap-and-click
features points upwards.
4
2
2
3
5
Mount the tubes (2) in (3) for a complete arch.
Mount the connector (5) with the middle tube (4).
Mount the horizontal tubes (3) with the connectors
(5) to make a ring.
6
Assemble and mount the top section consisting of (6)
and (7).
1
8
Now you can fasten the remaining corner bases if
necessary.
Finally, mount to cover onto the frame. Fasten the
four straps at the ends of the cover to the four corner
bases.
Each marquee consists of
No. 1
No. 2
No. 3
No. 4
No. 5
No. 6
No. 7
No. 8
Cover
7
4 pcs.
8 pcs.
4 pcs.
4 pcs.
4 pcs.
8 pcs.
1 pcs.
4 pcs.
1 pcs.