Dancover Multipavillon 3x6m Посібник - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник для Намет Dancover Multipavillon 3x6m. Dancover Multipavillon 3x6m 4 сторінки. Marquee
Друкувати сторінку1
Place the four corner bases (1) at the corners of a
square measuring 3x3 m.
If the marquee is mounted outside, use ground pegs
(8) inserted into the ground with a hammer.
If the marquee is mounted on a concrete or wooden
floor, the corner base can be fastened with concrete
nails or screws.
Ensure that you fasten only one corner until the
entire frame has been assembled in order to ensure
that the other corner bases are placed correctly within
the square.
4
2
1
Place the longest tubes (2) in the two outermost holes
in each corner base and the shorter tube (4) in the
middle hole. Mount the tubes so the snap-and-click
features points upwards.
4
2
2
3
5
Mount the tubes (2) in (3) for a complete arch.
Mount the connector (5) with the middle tube (4).
Mount the horizontal tubes (3) with the connectors
(5) to make a ring.
6
Assemble and mount the top section consisting of (6)
and (7).
1
8
Now you can fasten the remaining corner bases if
necessary.
Finally, mount to cover onto the frame. Fasten the
four straps at the ends of the cover to the four corner
bases.
Each marquee consists of
No. 1
No. 2
No. 3
No. 4
No. 5
No. 6
No. 7
No. 8
Cover
7
4 pcs.
8 pcs.
4 pcs.
4 pcs.
4 pcs.
8 pcs.
1 pcs.
4 pcs.
1 pcs.