Cascade 100R 사용자 설명서 - 페이지 14

{카테고리_이름} Cascade 100R에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cascade 100R 18 페이지. Integral mount sideshifter, sideshifting fork positioner

PERIODIC MAINTENANCE

2000-Hour

After 2000 hours of truck operation, in addition to the

1000-hour maintenance, forks in use shall be inspected

at intervals of not more than 12 months (for single shift

operations) or whenever any defect or permanent

deformation is detected. Severe applications will require

more frequent inspection.

Fork inspection shall be carried out by trained personnel

to detect any damage that might impair safe use. Any fork

that is defective shall be removed from service. Reference

ANSI B56.1-2005.

Inspect for the following defects:

• Surface cracks

• Straightness of blade and shank

• Fork angle

• Difference in height of fork tips

• Positioning lock

• Wear on fork blade and shank

• Wear on fork hooks

• Legibility of marking

NOTE: Fork Safety Kit 3014162 contains wear calipers,

inspection sheets and safety poster. Also available is fork

hook & carriage wear gauge 209560 (Class II), 209561

(Class III).

The attachment has been designed to prevent risks during

movement, installation and operation. There are, however,

some residual hazards:

• Hazard of crushing between the lift truck's front structure

and the mast when completely tilted backwards.

• Hazard of shearing between the lift truck's front structure

and mast components that move vertically with the mast

completely tilted backwards.

• Hazard of shearing between the attachment frame and

forks.

• Hazard of crushing during fork service procedures.

• Hazard of crushing during cylinder service procedures.

• Hazard of crushing during installation and periodic

maintenance operations.

6914838 EN