Cascade 100R Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cascade 100R. Cascade 100R 18 pagina's. Integral mount sideshifter, sideshifting fork positioner

Pagina afdrukken

PERIODIC MAINTENANCE

2000-Hour

After 2000 hours of truck operation, in addition to the

1000-hour maintenance, forks in use shall be inspected

at intervals of not more than 12 months (for single shift

operations) or whenever any defect or permanent

deformation is detected. Severe applications will require

more frequent inspection.

Fork inspection shall be carried out by trained personnel

to detect any damage that might impair safe use. Any fork

that is defective shall be removed from service. Reference

ANSI B56.1-2005.

Inspect for the following defects:

• Surface cracks

• Straightness of blade and shank

• Fork angle

• Difference in height of fork tips

• Positioning lock

• Wear on fork blade and shank

• Wear on fork hooks

• Legibility of marking

NOTE: Fork Safety Kit 3014162 contains wear calipers,

inspection sheets and safety poster. Also available is fork

hook & carriage wear gauge 209560 (Class II), 209561

(Class III).

RESIDUAL HAZARDS

The attachment has been designed to prevent risks during

movement, installation and operation. There are, however,

some residual hazards:

• Hazard of crushing between the lift truck's front structure

and the mast when completely tilted backwards.

• Hazard of shearing between the lift truck's front structure

and mast components that move vertically with the mast

completely tilted backwards.

• Hazard of shearing between the attachment frame and

forks.

• Hazard of crushing during fork service procedures.

• Hazard of crushing during cylinder service procedures.

• Hazard of crushing during installation and periodic

maintenance operations.

6914838 EN