Dancover 2m Series 매뉴얼 - 페이지 6

{카테고리_이름} Dancover 2m Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dancover 2m Series 7 페이지. Work tent
Dancover 2m Series에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

4. Assembly of legs

a) Insert (No.1) legs into an end arch one side at a time.

b) Insert (No.2) legs to the second arch.

c) Add second arch to assembly connecting (No.8) into (No.7) and

diagonal bar (No.6) with screws 2 ½" (No.12) with wing nuts

(No.13). See sketch at front page. Note: (06-374) should be

placed at last section.

d) Repeat step b) and c) until the whole shelter is completed.

e) Make sure the base is open to 2m.

f) Make sure the distances AD and BC have exactly the same

length as per illustration, lengths depends on the model.

5. Cover installation (Ties are always on the inside)

a) Place the roof in front of the shelter as illustrated.

b) Unfold as illustrated then lift onto shelter as is.

c) Place cover over the completed structure making sure that the

TRIANGLE is at the front of the garage.

d) Attach all straps inside the roof ot the structure poles going

completely around the garage.

e) Tie firmly inside ties to bars.

6. Anchoring garage.

a) Place your garage in the final position you want then close the

doors, front and back if supplied before anchoring, anchor with

brackets (No.9) and nail (No.10) as per diagram on the first

page. Drive anchor into ground.

b) Fix flap to your house (if applicable).