Dancover COMMERCIAL TITAN Peak 240 8.82m2 매뉴얼 - 페이지 10

{카테고리_이름} Dancover COMMERCIAL TITAN Peak 240 8.82m2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dancover COMMERCIAL TITAN Peak 240 8.82m2 16 페이지.

페이지 인쇄

Manual

INSTALLATION SEQUENCE

STAGE 5

End section installation

In the variant of

installation of the

greenhouse without a

foundation, marking

of axes is made on the

ground in accordance

with fig. 5.1 and holes

70 cm deep are dug for

foundation stay braces

with supports.

In the variant of

installation of the

greenhouse on a

foundation in accordance

with fig. 5.1, cleater

angles are mounted to

the foundation for the

subsequent fastening on

them bottom ends of arcs

in accordance with fig.

5.2 without foundation

stay braces.

The end section is lifted

and placed in a vertical

position on the prepared

place.

200*

100

Fig. 5.2

fig. 5.1

5000

200*

INSTALLATION SEQUENCE

STAGE 6

Extension of the frame

length.

Assembled power arc (or

Next power arc is joined

other end wall, depending

to the power arc that has

on the needed length

already been connected,

of the greenhouse) is

and so on all the arcs are

brought to the assembled

alternatively joined

end section at the

distance of the main

runner and joined to

it with the use of main

runners 2 and 2н align

the side flanges of shapes

(fig. 6).

It is recommended to

connect the outermost

and middle runners first,

using a stepladder.

Fig. 6

Manual

2н