Duke FCP4-SB 설치 및 운영 매뉴얼 - 페이지 4

{카테고리_이름} Duke FCP4-SB에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duke FCP4-SB 12 페이지. Flush mount cold pan

Installation and Operation of: Drop In Flush Mount Cold Pan

WARNING

ELECTRICAL SHOCK HAZARD UNIT MUST BE SAFETY GROUNDED, EARTHED.

DO NOT MODIFY, DEFEAT ELECTRICAL CONNECTIONS OR ALTER PLUG.

ELECTRICAL CONNECTIONS

BEFORE CONNECTING THE UNIT TO THE POWER SOURCE, VERIFY THAT THE

VOLTAGE AND PHASE OF THE POWER SOURCE ARE IDENTICAL TO THE VOLTAGE AND

PHASE INFORMATION ON THE DATA LABEL.

ALL MAINS DISCONNET MUST BE INCORPORATED IN THE FIXED WIRING IN ACCORDANCE

WITH LOCAL WIRING RULES

EARTHING INSTRUCTIONS

1. THE UNIT MUST BE GROUNDED. Grounding reduces risk of electric shock by providing an escape wire

for the electric current if an electrical short occurs. This unit is equipped with a cord having a grounding

wire with a grounding plug. The plug must be plugged into a receptacle that is properly installed and

grounded.

2. Consult a qualified electrician or service agent if grounding instructions are not completely understood,

or if doubt exists as to whether the unit is properly grounded.

3. DO NOT USE AN EXTENSION CORD. If the product power cord is too short, have a qualified electrician

install a three-slot receptacle (or the country specific receptacle for International Units). This unit should

be plugged into a dedicated circuit with the electrical rating as provided on the product data plate.

INSTALLATION CODES AND STANDARDS

In the United States, the Unit must be installed in accordance with the following:

4. State and local codes.

5. National Electrical Code (ANSI/NFPA No. 70, latest edition) available from the National Fire Protection

Association, Batterymarch Park, Quincy, MA 02269.

6. Vapor Removal from Cooking Equipment, (NFPA-96, latest edition) available from NFPA.

7. Sealed to the counter upon which the equipment is placed per NSF/ANSI 4 standard.

In Canada, the Unit must be installed in accordance with the following:

1. Local codes.

2. Canadian Electrical Code (CSA C22.2 No. 3, latest edition) available from the Canadian Standards

Association, 5060 Spectrum Way, Mississauga, Ontario, Canada L4W 5N6.