Duke FCP4-SB 설치 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} Duke FCP4-SB에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duke FCP4-SB 12 페이지. Flush mount cold pan

Important to Note:

•

This unit has been designed to hold and maintain your cold products to the NSF7 standard.

•

Wells can be expected to reach set point temperature within a 30 minute time frame.

Inspect the shipping carton and/or container, carefully noting any exterior damage on the delivery receipt;

also note any damage not evident on the outside of the shipping container (concealed damage). Contact

the carrier immediately and file a damage claim with them. Save all packing materials when filing a claim.

Freight damage claims are the responsibility of the purchaser and are not covered by the warranty.

• Follow the instructions on the Carton Box for unpacking the unit.

• Inspect unit for damage.

• Report any dents or breakage to source of purchase immediately.

• Do not attempt to use unit if damaged.

• Remove all packing materials from unit interior.

• If unit has been stored in extremely cold area, wait a few hours before connecting power.

1. Remove shrink wrapped bag from the unit. (It is stapled to the crate at both ends.)

2. Remove strapping and protective cardboard from around the unit.

3. The feet are set into V-shaped wedges for shipping. Remove all wood pieces from the pallet before

trying to lift it off.

Installation and Operation of: Drop In Flush Mount Cold Pan

INTRODUCTION