Airwater Baltik 사용 설명서 - 페이지 5

{카테고리_이름} Airwater Baltik에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Airwater Baltik 11 페이지.

Then,

remove the blue part (filter), which must not be cleaned with

the no-spill cone. The filter should either be cleaned with a damp

cloth or replaced;

F I L T E R

6. Remove the floating baffle (blue dish in the reservoir) by pulling it

off the diffuser tube. Do

not

7. Remove the two faucets:

* Grip the cold water (blue tab) faucet and turn it counter-clock-

wise until the nozzle is at 90° (horizontal to the right), then

pull;

* Grip the warm water (white tab) or hot water (red tab) faucet

and turn it clockwise until the nozzle is at 270° (horizontal to

the left), then pull.

8. Remove the water reservoir by pulling it upwards;

9. Clean the drip tray, floater, no-spill cone and faucets on the upper

rack of a dishwasher.

F I L T E R

remove the diffuser tube;

10.

Clean the plastic or stainless steel reservoir (Cook & cold model

only) on the lower rack of a dishwasher. Instructions on page 31

are also valid.

After cleaning the cold-water reservoir, you need to re-assemble the

components as follows:

11. Re-install

the

cold-water

reservoir. Make sure that the

sockets (fittings) are centered

in front of the cooler so that

you can assemble the faucets

correctly.

12. Re-install the faucets:

* The cold-water faucet (blue

tab)

goes in the right

hand side socket (facing the

cooler). Insert with nozzle at

90° in the socket (fitting), push

hard and turn clockwise;