Airwater Baltik Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Диспенсер для воды Airwater Baltik. Airwater Baltik 11 страниц.

Then,

remove the blue part (filter), which must not be cleaned with

the no-spill cone. The filter should either be cleaned with a damp

cloth or replaced;

F I L T E R

6. Remove the floating baffle (blue dish in the reservoir) by pulling it

off the diffuser tube. Do

not

7. Remove the two faucets:

* Grip the cold water (blue tab) faucet and turn it counter-clock-

wise until the nozzle is at 90° (horizontal to the right), then

pull;

* Grip the warm water (white tab) or hot water (red tab) faucet

and turn it clockwise until the nozzle is at 270° (horizontal to

the left), then pull.

8. Remove the water reservoir by pulling it upwards;

9. Clean the drip tray, floater, no-spill cone and faucets on the upper

rack of a dishwasher.

F I L T E R

remove the diffuser tube;

10.

Clean the plastic or stainless steel reservoir (Cook & cold model

only) on the lower rack of a dishwasher. Instructions on page 31

are also valid.

After cleaning the cold-water reservoir, you need to re-assemble the

components as follows:

11. Re-install

the

cold-water

reservoir. Make sure that the

sockets (fittings) are centered

in front of the cooler so that

you can assemble the faucets

correctly.

12. Re-install the faucets:

* The cold-water faucet (blue

tab)

goes in the right

hand side socket (facing the

cooler). Insert with nozzle at

90° in the socket (fitting), push

hard and turn clockwise;