Danfoss 176F3167 애플리케이션 매뉴얼 - 페이지 5
{카테고리_이름} Danfoss 176F3167에 대한 애플리케이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss 176F3167 8 페이지. Top fan kit for fa09-fa12/d3h-d4h/e3h-e4h
페이지 인쇄
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide
2.5 Removing the Top Fan and Single Fan Housing
To remove a fan with a single fan housing, use the following steps. See
1.
Unfasten 2 screws (T25) and remove the front cover from the frequency converter.
2.
Unplug the top fan cable connector.
3.
Pull the top fan cable through the cable access hole, freeing it from the cabinet.
4.
Remove 2 screws (T25) from the top fan housing.
5.
Slide the fan housing and top fan out from under the retaining clips on top of the frequency converter.
1
2
3
4
5
6
Illustration 2: Top Fan with Single Fan Housing
1
Single top fan housing
2
Screw (T25)
3
Top fan
2.6 Installing the Top Fan and Single Fan Housing
To install the top fan and single fan housing, use the following steps.
1.
Feed the top fan cable through the cable access hole on the top of the frequency converter.
2.
Reconnect the in-line fan cable connector.
3.
Place the top fan in the fan housing with the air direction arrows pointing upward and away from the frequency converter.
4.
Slide the fan housing and fan under the retaining clips on top of the frequency converter.
5.
Fasten 2 screws (T25) in the single fan housing, securing it to the frequency converter.
6.
Place the front cover on the frequency converter, and fasten with 2 screws (T25).
2.7 Removing the Top Fan and Double Fan Housing
To remove the top fan and double fan housing, use the following steps. Refer to
1.
Unfasten 4 screws (T25) and remove the upper front cover of the frequency converter.
Danfoss A/S © 2022.03
Illustration
2.
4
Top fan cable and connector
5
Retaining clip
6
Cable access hole
Illustration
3.
AN389655468601en-000101 / 130R0767 | 5
Installation