Aolait AL400RX 사용자 설명서 - 페이지 6

{카테고리_이름} Aolait AL400RX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aolait AL400RX 14 페이지. 380w 3in1 moving head

Operation

Operate light with touch or encoder button

⚫ The left area is TFT Displayer and touch, chick item or value with finger will to complete

operation of set light setting(parameters) or view light state.

⚫ The area on the right hand side is rotary encoder with button, As auxiliary input interface, if

disable touch function,, the encoder can been choose to set or view the item, and then press

the encoder button to confirm the selection, rotary encoder again set the parameter value,

finally, Press encoder button one again to save value or setting.

Parameter value setting

When the selected item is value need to been modified, the dialog shown in will popup.

⚫ Modify value：Can quickly modify value via pull the slider to the desired position, or click the

button of 'up' or 'down' whit finger on the right side to set the exact desired value, another way

is roll encoder on the right hand side of panel.

⚫ Apply value： When Value had been modified, Then press the bottom of 'apply' in the left corner

to apply to the light, but hav't saved；

⚫ Save Value：Any time, click on the lower right corner of the "OK" button, the setting will been

saved into internal memory.

Boolean parameter setting

⚫ when the selected parameters is a Boolean value (such as ON or OFF), can directly modify

setting by chick corresponding item, the setting will been saved right now.

4/12