Dunavox DX-119.386DB 사용 설명서 - 페이지 11

{카테고리_이름} Dunavox DX-119.386DB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunavox DX-119.386DB 17 페이지.
Dunavox DX-119.386DB에 대해서도 마찬가지입니다: 사용 설명서 (19 페이지)

6. OPERATING YOUR WINE COOLER

RUN

SET Chamber/Upper chamber

To view the set internal temperature/actual temperature of upper chamber

Chamber/Lower chamber

To view the actual internal temperature/actual temperature of lower chamber

LIGHT

To turn the inner light on/off.

You could increase the set temperature 1 ºC or 1 ºF by pressing this mark once.

• When you use the Wine cooler for the first time or restart it after having

been shut off for a long time, there could be a few degrees variance

between the temperature you set and the one indicated on the LED

readout. This is normal and it is due to the length of the activation time.

Once the Wine Cooler is running for a few hours, everything will be back

to normal.

• The Wine Cooler should be placed in a position where the ambient

temperature is between 10~32°C/55~90 °F. If the ambient temperature

is above or below this range, the performance of the unit may be

affected. For example, placing your unit in extreme cold or hot conditions

may

cause

interior

5~22°C/40~72 °F may not be reached

• DX-119.386DB, DSS: It is recommended you install the wine fridge in a

place where the ambient temperature is between 19ºC-24ºC (66ºF-

75ºF), and humidity is under 60%. If the ambient temperature is above or

below recommended temperatures, the performance of the unit may be

affected.

For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate. The range of

5ºC-18ºC (40ºF-65ºF) may not be reached.

S E T

C H A M B E R

(DX-80.188K, DX-114.270K, DX-200.450K)

INSTRUCTION MANUAL

temperatures

C H A M B E R

fluctuate.

The

range

P O W E R

C/ F